---
updatedAt: 2025-08-05T13:24:44.000Z
agentTools:
  projectIndex: https://manuals-ugcs4dji.sphengineering.com/llms.txt
---

# Offline route

The Offline route function allows using only Android devices on the field. All prepared missions/routes can be saved and uploaded to the drone with UgCS for DJI mobile application.

#### Note: UgCS telemetry is available ONLY if the drone is connected to UgCS Desktop during the flight.

Follow the steps:

1. Create mission/route in UgCS Desktop
2. Connect the tablet to the PC and run UgCS for DJI

![](https://files.readme.io/2f0c71f-image78.png "image78.png")

3. In UgCS for DJI tap on three dots on the bottom and open the route

![](https://files.readme.io/72b1030-image79.png "image79.png")

NOTE: If in the UgCS Desktop there are several users, the credential window will appear

![](https://files.readme.io/621c91c-image80.jpeg "image80.jpeg")

Enter Login and Password

![](https://files.readme.io/9f1387d-image81.jpeg "image81.jpeg")

4. In bookmarks of UgCS Server find UgCS desktop missions/routes

![](https://files.readme.io/e75eb3c-image82.jpg "image82.jpg")

5. Click on the route name in the Route section - then click on the three dots to save the mission for offline

![](https://files.readme.io/d955afd-image83.png "image83.png")

6. Now the route is saved for the offline function
7. Connect drone to UgCS for DJI via RC
8. Tap on three dots

![](https://files.readme.io/5bb0523-image84.png "image84.png")

9. Open bookmark LOCAL and choose the route

![](https://files.readme.io/4e17a9b-image85.png "image85.png")

10. Upload route to drone

![](https://files.readme.io/d408cb2-image86.png "image86.png")

11. There is a window where possible to specify takeoff altitude

#### NOTE: If takeoff is performed from ground level, do not change altitude.

12. Press CONFIRM

![](https://files.readme.io/6d019b6-image87.png "image87.png")

13. Enable AutoMode

![](https://files.readme.io/8241f8a-image88.png "image88.png")

14. Send the drone on the mission